The rapid expansion of satellite networks and the continuous launch of new channels make staying informed about accurate frequency information essential. Without precise tuning, viewers may experience interruptions, degraded signal quality, or the complete loss of channels they rely on daily.
Satellite systems are complex and constantly evolving. Channel frequencies, transponder settings, and transmission parameters are frequently updated, requiring viewers to adjust their equipment to maintain consistent access. Being aware of these changes ensures uninterrupted entertainment and reliable reception.
Accurate configuration of satellite receivers is crucial for achieving optimal performance. Key parameters, including frequency, polarization, symbol rate, and modulation type, must be entered carefully to avoid weak signals or distorted images, ensuring a clear and stable viewing experience.
The quality of equipment also significantly influences reception. High-quality satellite dishes, secure connectors, and durable cabling work together to maintain strong and consistent signals, even in areas affected by environmental challenges or signal interference.
Correct alignment and positioning of the satellite dish further enhance performance. Even small adjustments in angle or direction can improve signal strength, reduce interference, and guarantee that all desired channels are received with maximum clarity.
Understanding regional satellite coverage areas allows viewers to optimize their installations. Knowledge of footprints helps users receive the full range of available channels while minimizing disruptions or the need for repeated retuning.
With precise receiver settings, quality equipment, and awareness of satellite coverage, viewers can enjoy a seamless and uninterrupted television experience. This combination ensures access to a rich variety of content worldwide, from entertainment and sports to news and educational programming, all delivered with clarity and reliability.
The rapid expansion of satellite networks and the continuous launch of new channels make staying informed about accurate frequency information essential. Without precise tuning, viewers may experience interruptions, degraded signal quality, or the complete loss of channels they rely on daily.
Satellite systems are complex and constantly evolving. Channel frequencies, transponder settings, and transmission parameters are frequently updated, requiring viewers to adjust their equipment to maintain consistent access. Being aware of these changes ensures uninterrupted entertainment and reliable reception.
Accurate configuration of satellite receivers is crucial for achieving optimal performance. Key parameters, including frequency, polarization, symbol rate, and modulation type, must be entered carefully to avoid weak signals or distorted images, ensuring a clear and stable viewing experience.
The quality of equipment also significantly influences reception. High-quality satellite dishes, secure connectors, and durable cabling work together to maintain strong and consistent signals, even in areas affected by environmental challenges or signal interference.
Correct alignment and positioning of the satellite dish further enhance performance. Even small adjustments in angle or direction can improve signal strength, reduce interference, and guarantee that all desired channels are received with maximum clarity.
Understanding regional satellite coverage areas allows viewers to optimize their installations. Knowledge of footprints helps users receive the full range of available channels while minimizing disruptions or the need for repeated retuning.
With precise receiver settings, quality equipment, and awareness of satellite coverage, viewers can enjoy a seamless and uninterrupted TV experience. This combination ensures access to a rich variety of content worldwide, from entertainment and sports to news and educational programming, all delivered with clarity and reliability.
The rapidly changing landscape of satellite broadcasting demands constant attention to frequency information. Without accurate data, viewers risk losing access to channels or experiencing interrupted reception, highlighting the importance of precise tuning and regular updates.
Modern satellites are equipped with multiple transponders and frequently adjust their positions, requiring viewers to stay informed to maintain uninterrupted access. Awareness of these changes allows audiences to enjoy continuous, high-quality viewing without the frustration of signal drops or pixelation.
Setting up a satellite receiver correctly is a critical step in ensuring optimal performance. Accurate entry of parameters such as frequency, polarization, symbol rate, and modulation type is essential to avoid weak signals, distorted images, or temporary channel loss.
The quality of equipment plays an equally vital role. Durable satellite dishes, high-quality cables, and secure connectors work together to sustain strong, stable signals, even in challenging weather conditions or regions with complex satellite footprints.
Proper dish alignment and orientation are crucial to maximizing signal strength. Even minor adjustments can significantly enhance reception, reduce interference, and ensure that viewers receive every available channel with clear and stable transmission.
Understanding regional satellite coverage allows viewers to optimize their installations effectively. By knowing the exact footprint of each satellite, users can configure their dishes to capture the widest possible range of channels while minimizing interference from nearby satellites.
Combining precise receiver settings, robust equipment, and a comprehensive understanding of satellite coverage guarantees a seamless TV experience. Viewers can enjoy uninterrupted access to a rich variety of content, making satellite technology an indispensable tool for modern entertainment, information, and education.
With satellites continuously launching new transponders and channels, keeping up-to-date with frequency information is crucial. Accurate data ensures that viewers can tune their equipment correctly and avoid interruptions in signal reception.
Satellite networks are dynamic and subject to frequent changes, including channel relocations and updates in transmission parameters. Awareness of these adjustments allows audiences to maintain seamless access to their favorite programming.
Proper receiver configuration is fundamental for achieving stable and clear signals. Parameters like frequency, symbol rate, polarization, and modulation must be entered with precision to prevent disruptions, weak reception, or distorted images.
Equipment quality is just as important as accurate settings. High-grade satellite dishes, robust connectors, and reliable cables ensure that signals remain strong and consistent, even in areas prone to harsh weather conditions or environmental interference.
Aligning the satellite dish correctly is a critical factor in reception performance. Slight modifications in angle or orientation can significantly improve signal strength, reduce interference, and guarantee uninterrupted access to all intended channels.
Understanding satellite coverage areas helps viewers optimize their installations. Knowledge of footprints allows users to receive the maximum number of channels available in their region and minimizes the need for frequent adjustments.
Combining precise receiver settings, high-quality equipment, and awareness of satellite coverage ensures a smooth, uninterrupted viewing experience. Audiences can enjoy a diverse range of global content with confidence, whether for entertainment, education, or news, without worrying about signal interruptions.
The rapidly evolving satellite landscape demands that viewers stay informed about accurate frequency information. Without timely updates, even minor changes in channel positions or transponder settings can result in disrupted reception, pixelated images, or complete signal loss.
Accurate receiver configuration is critical for maintaining uninterrupted access. Parameters such as frequency, polarization, symbol rate, and modulation type must be set precisely to ensure strong signal reception and optimal picture and sound quality.
High-quality satellite equipment further enhances performance. Reliable dishes, sturdy cables, and secure connectors help maintain stable signals, reducing the impact of environmental factors such as heavy rain, storms, or strong winds on channel reception.
Correct alignment and precise positioning of the satellite dish can significantly improve signal strength. Small adjustments in angle or direction often lead to better reception, minimizing interference and ensuring that viewers receive all intended channels clearly.
Understanding satellite coverage areas is essential for optimizing installations. By knowing which satellites provide the best signal for their region, viewers can maximize channel availability and enjoy uninterrupted access to their favorite programs.
Regular maintenance of the satellite system contributes to long-term stability. Periodic checks of cables, connectors, and dish alignment help prevent technical issues and ensure a consistently high-quality viewing experience.
Combining precise receiver settings, robust equipment, proper dish alignment, and knowledge of satellite footprints guarantees a seamless TV experience. Viewers can confidently enjoy a wide range of global content, from entertainment and sports to news and educational programming, without worrying about signal disruptions.
Dubai Racing TV, operated by Dubai Media Incorporated (DMI), is a premier TV network specializing in horse racing, camel racing, and falconry, broadcasting live events with state-of-the-art technology.
Launched to promote equestrian and traditional sports, it is the first Arab channel to cover horse racing in the United States and offers exclusive coverage of global races from countries like the UK, Ireland, Japan, Australia, and France.
Popular programs include live broadcasts of the Dubai World Cup at Meydan Racecourse and analytical shows like Racing Highlights.
As a free-to-air channel, Dubai Racing TV is accessible on major satellites and streams live on www.dubairacing.ae and www.awaan.ae. This guide provides the latest frequencies for Dubai Racing TV channels (Dubai Racing 1, 2, and 3) as of June 2025, a step-by-step tuning process, reception tips, and an overview of its captivating content.
Why Watch Dubai Racing TV?
-
Specialized Content: Offers exclusive coverage of horse racing, camel racing, and falconry, appealing to sports enthusiasts.
-
Global Reach: Broadcasts international events, including the prestigious Dubai World Cup, with live feeds to the US and beyond.
-
Free-to-Air Access: Available without subscription on satellites and online platforms.
-
High-Quality Broadcasts: Delivers HD and SD options for clear, immersive viewing.
-
Cultural Significance: Promotes traditional Arabian sports alongside modern racing, connecting with regional and global audiences.
Dubai Racing TV Satellite Frequencies
To tune into Dubai Racing TV (Dubai Racing 1, 2, and 3), you need accurate frequency, polarization, symbol rate, and FEC (Forward Error Correction) settings for your satellite receiver.
|
Satellite |
Channel |
Frequency |
Polarization |
Symbol Rate |
FEC |
Coverage |
Details |
|---|---|---|---|---|---|---|---|
|
Nilesat 201/Eutelsat 7 West A (7.0° W) |
Dubai Racing 1 |
12418 MHz |
Horizontal (H) |
30000 kS/s |
2/3 |
Middle East, North Africa |
HD, DVB-S2, strong in UAE, Egypt, Saudi Arabia. Named Dubai Racing 1 HD. |
|
Nilesat 201/Eutelsat 7 West A (7.0° W) |
Dubai Racing 2 |
12418 MHz |
Horizontal (H) |
30000 kS/s |
2/3 |
Middle East, North Africa |
SD, DVB-S2, strong in UAE, Egypt, Saudi Arabia. Named Dubai Racing 2. |
|
Arabsat (Badr 4/8) (26.0° E) |
Dubai Racing 1 |
12130 MHz |
Vertical (V) |
27500 kS/s |
3/4 |
Middle East, North Africa |
SD, DVB-S, reliable in Qatar, Jordan, Kuwait. Named Dubai Racing 1. |
|
Arabsat (Badr 4/8) (26.0° E) |
Dubai Racing 2 |
12130 MHz |
Vertical (V) |
27500 kS/s |
3/4 |
Middle East, North Africa |
SD, DVB-S, reliable in Qatar, Jordan, Kuwait. Named Dubai Racing 2. |
|
Hot Bird 13B/C/D (13.0° E) |
Dubai Racing 3 |
12380 MHz |
Horizontal (H) |
27500 kS/s |
3/4 |
Middle East, Europe |
SD, DVB-S, available in parts of Europe and MENA. Named Dubai Racing 3. |
Key Information
-
Satellite Coverage: Dubai Racing TV primarily broadcasts on Nilesat and Arabsat (Badr), with Dubai Racing 3 also available on Hot Bird for European viewers. No confirmed frequencies are available on Yahsat (52.5° E), Es’hail 2 (26.0° E), or Eutelsat 8 West B (8.0° W) as of June 2025. Claims of Dubai Racing on these satellites are outdated.
-
Frequency Accuracy: Avoid obsolete frequencies like 11785 MHz (Vertical, FEC 3/4) or 12226 MHz (Horizontal) on Nilesat, which are no longer active for Dubai Racing. The table above provides verified settings.
-
Global Access: Signals may weaken outside MENA (e.g., Asia or the Americas). Stream live on www.dubairacing.ae or www.awaan.ae for worldwide access.
-
Free-to-Air Status: All Dubai Racing channels are unencrypted, requiring no subscription, ensuring accessibility within satellite footprints.
Tips for Strong Reception
To enjoy Dubai Racing TV with clear, uninterrupted viewing, follow these practical tips for optimal satellite reception:
-
Dish Size: Use a 60-80 cm dish for Nilesat and Arabsat in MENA (e.g., Dubai, Cairo, Riyadh). For Hot Bird in Europe, a 70-100 cm dish is recommended. In fringe areas (e.g., northern Europe or Central Asia), a 90-120 cm dish enhances signal strength.
-
Precise Dish Alignment: Point your dish to Nilesat (7.0° W), Arabsat (26.0° E), or Hot Bird (13.0° E) using a satellite finder or apps like DishPointer or SatFinder. Ensure no obstructions block the signal.
-
LNB Selection: Setup a Universal Ku-band LNB (9.75/10.6 GHz) compatible with DVB-S for Arabsat and DVB-S2 for Nilesat and Hot Bird HD/SD broadcasts. Confirm receiver compatibility.
-
Signal Quality: Aim for 70% or higher signal quality (98% is optimal) on your receiver’s signal meter to prevent pixelation. Adjust LNB skew for peak performance.
-
Weather Protection: Ku-band signals may weaken during heavy rain. Secure your dish and check LNB caps for water damage to maintain stability.
-
Coverage Check: Verify your location is within the satellite’s beam using coverage maps on www.dishpointer.com or www.satbeams.com.
Tuning Dubai Racing TV on Your Receiver
Adding Dubai Racing TV (Dubai Racing 1, 2, or 3) to your satellite receiver is straightforward with these steps, compatible with most receivers (e.g., Strong, Humax, Starsat), though menu labels may vary slightly.
-
Access the Menu:
-
Press “Menu” or “Settings” on your remote.
-
Navigate to “Installation,” “Channel Search,” or “Antenna Setup.”
-
-
Select Manual Scan:
-
Choose “Manual Scan,” “Manual Installation,” or “Add Relay.”
-
Select “Add TP” or “Edit Relay” if prompted.
-
-
Choose Your Satellite:
-
Select Nilesat (7.0° W), Arabsat (Badr 4/8, 26.0° E), or Hot Bird (13.0° E) from the satellite list.
-
If not listed, manually enter the orbital position.
-
-
Enter Relay Settings:
-
Refer to the frequency table above and input the settings for your chosen satellite and channel (e.g., 12418 MHz, Horizontal, 30000 kS/s, 2/3 for Dubai Racing 1 on Nilesat).
-
Double-check entries for accuracy.
-
-
Run the Scan:
-
Press “Scan,” “Search,” or “OK” to start the scan.
-
Select “FTA Only” or “All Channels” to include free-to-air channels.
-
Wait 1-3 minutes for the scan to complete.
-
-
Save Channels:
-
Press “Save” or “OK” to store the scanned channels.
-
Dubai Racing 1, 2, or 3 will appear as “Dubai Racing 1 HD,” “Dubai Racing 2,” or “Dubai Racing 3” in your channel list.
-
-
Fine-Tune for Strong Signal:
-
If the signal is weak or the channel is missing, adjust the dish’s azimuth and elevation while monitoring the signal meter.
-
Check LNB skew and cables for 70-98% signal strength.
-
-
Test the Streaming:
-
Locate the desired Dubai Racing channel in your channel list and select it to confirm clear playback.
-
If issues persist, recheck settings or consult a professional installer.
-
Receiver Tips:
-
For Strong receivers (e.g., SRT 4950), enable “LNB Power” in the “Relay” menu.
-
For Humax or Starsat, set LNB to “Universal” for Ku-band.
-
Default PINs (e.g., 0000, 1234) may be required; refer to your manual.
Dubai Racing TV’s Engaging Programming
Dubai Racing TV delivers a unique lineup of programs focused on equestrian and traditional sports, appealing to enthusiasts of all ages. Key highlights include:
Top Programs
-
Dubai World Cup Coverage: Live broadcasts of the US$30.5 million Dubai World Cup at Meydan Racecourse, a global highlight of the racing calendar (April 5, 2025).
-
Racing Highlights: Analytical show covering major horse racing events from Dubai, the UK, Ireland, Japan, and Australia.
-
Camel Racing Events: Live coverage of traditional camel races in the UAE and other Gulf countries.
-
Falconry Competitions: Programs showcasing falconry, a cultural sport deeply rooted in Arabian heritage.
-
Global Racing Roundup: Features exclusive races from international tracks in France, Hong Kong, and Singapore.
Content divisions
-
Horse Racing: Live and recorded coverage of local and global races, including the Dubai Racing Carnival (November 8, 2024–March 14, 2025).
-
Camel Racing: Highlights traditional Gulf sports with live events and analysis.
-
Falconry: Showcases competitions and cultural significance of falconry in the UAE.
-
Sports Analysis: Expert commentary on race strategies, horse performance, and jockey profiles.
-
Documentaries: Explores the history and culture of equestrian sports in the Arab world.
Satellite networks frequently update their transponder positions and channel frequencies. Staying informed about these changes allows viewers to quickly adjust their equipment and maintain seamless access to all channels.
High-quality equipment is crucial for signal stability. Durable dishes, reliable cables, and secure connectors reduce the risk of weak reception or disruptions caused by environmental factors like rain or strong winds.
Correct alignment of the satellite dish significantly improves signal strength. Even minor adjustments in angle or direction can enhance reception, minimize interference, and ensure that all desired channels are received with clarity.
Understanding satellite coverage areas helps optimize installations. Knowledge of footprints allows viewers to capture the maximum number of channels available in their region and reduces the need for repeated retuning or troubleshooting.
By combining precise receiver settings, quality equipment, and proper dish alignment, viewers can enjoy a smooth and uninterrupted TV experience, ensuring access to a wide variety of entertainment, news, sports, and educational content.
Signal clarity is influenced by the combination of accurate receiver configuration and durable hardware. Properly installed dishes, reinforced cables, and secure connectors ensure stable performance even in areas affected by environmental challenges or high interference.
Fine-tuning the satellite dish and verifying all parameters can greatly enhance the viewing experience. Small adjustments often translate into sharper images, uninterrupted audio, and reliable access to all available channels.
With informed setup, quality equipment, and careful tuning, viewers can enjoy TV seamlessly and without frustration. This approach guarantees a dependable and high-quality viewing experience across a wide variety of channels, from entertainment and sports to news and educational content.
Satellite networks frequently update their transponder positions and channel frequencies. Staying informed about these changes allows viewers to quickly adjust their equipment and maintain seamless access to all channels.
High-quality equipment is crucial for signal stability. Durable dishes, reliable cables, and secure connectors reduce the risk of weak reception or disruptions caused by environmental factors like rain or strong winds.
Correct alignment of the satellite dish significantly improves signal strength. Even minor adjustments in angle or direction can enhance reception, minimize interference, and ensure that all desired channels are received with clarity.
Understanding satellite coverage areas helps optimize installations. Knowledge of footprints allows viewers to capture the maximum number of channels available in their region and reduces the need for repeated retuning or troubleshooting.
By combining precise receiver settings, quality equipment, and proper dish alignment, viewers can enjoy a smooth and uninterrupted TV experience, ensuring access to a wide variety of entertainment, news, sports, and educational content.
The performance of any satellite system depends on a combination of precise configuration and reliable equipment. Using high-quality dishes, secure connectors, and sturdy cables ensures that signals remain strong, minimizing interruptions even in challenging weather conditions.
Adjusting dish alignment and monitoring signal strength regularly can significantly improve the overall viewing experience. Minor tweaks often result in sharper visuals, uninterrupted audio, and consistent access to all desired channels without distortion or interference.
By combining technical knowledge, quality hardware, and careful tuning, viewers can enjoy an effortless and immersive satellite TV experience. This approach guarantees reliable access to global content, including news, entertainment, sports, and educational programming, enriching the viewing experience for every member of the household.
The performance of any satellite system depends on a combination of precise configuration and reliable equipment. Using high-quality dishes, secure connectors, and sturdy cables ensures that signals remain strong, minimizing interruptions even in challenging weather conditions.
Adjusting dish alignment and monitoring signal strength regularly can significantly improve the overall viewing experience. Minor tweaks often result in sharper visuals, uninterrupted audio, and consistent access to all desired channels without distortion or interference.
By combining technical knowledge, quality hardware, and careful tuning, viewers can enjoy an effortless and immersive satellite TV experience. This approach guarantees reliable access to global content, including news, entertainment, sports, and educational programming, enriching the viewing experience for every member of the household.
Signal clarity is influenced by the combination of accurate receiver configuration and durable hardware. Properly installed dishes, reinforced cables, and secure connectors ensure stable performance even in areas affected by environmental challenges or high interference.
Fine-tuning the satellite dish and verifying all parameters can greatly enhance the viewing experience. Small adjustments often translate into sharper images, uninterrupted audio, and reliable access to all available channels.
With informed setup, quality equipment, and careful tuning, viewers can enjoy TV seamlessly and without frustration. This approach guarantees a dependable and high-quality viewing experience across a wide variety of channels, from entertainment and sports to news and educational content.
Signal clarity depends not only on correct receiver settings but also on the quality of the equipment used. High-grade satellite dishes, robust connectors, and reliable cables work together to maintain strong and stable reception, even under challenging environmental conditions.
Accurate configuration of frequency, polarization, symbol rate, and modulation is essential for optimal performance. Even minor errors can result in distorted images, weak signals, or temporary loss of channels, making attention to detail a key factor for uninterrupted viewing.
Proper dish alignment is crucial in maximizing signal strength. Adjusting the angle or direction of the dish, even slightly, can significantly reduce interference and improve reception across all available channels, ensuring a smooth and consistent experience.
Awareness of satellite coverage areas and footprints allows viewers to optimize their installations. By understanding which satellites provide the best signal in their region, audiences can access a wider range of channels with minimal effort or repeated adjustments.
Regular monitoring and maintenance of the satellite system further enhance long-term performance. Periodically checking equipment, verifying connections, and fine-tuning alignment prevent potential disruptions and contribute to a consistently high-quality viewing experience.
By combining accurate receiver settings, quality equipment, proper alignment, and knowledge of satellite coverage, viewers can enjoy a seamless and immersive TV experience. This approach ensures reliable access to entertainment, news, sports, and educational programming, creating a satisfying and uninterrupted viewing environment for the entire household.
Signal quality depends not only on correct settings but also on the durability and performance of hardware. Well-built dishes, robust cables, and tightly secured connectors contribute to consistent reception even when environmental conditions are less than ideal.
Proper dish orientation and precise tuning can make a significant difference in signal clarity. Small adjustments often lead to clearer images, uninterrupted audio, and the ability to enjoy every available channel without interference.
By combining careful configuration, high-quality equipment, and informed placement, audiences can enjoy TV that is both reliable and immersive. This ensures continuous access to a wide range of programs, from sports and news to entertainment and educational content, all delivered with high-quality performance.
Accurate frequency information is essential to prevent signal loss or interference. Even small errors in setting transponders or modulation parameters can result in disrupted viewing, making updated data a necessity for uninterrupted access.
High-quality hardware plays a major role in consistent performance. Robust dishes, durable cabling, and secure connectors maintain strong signal strength, ensuring uninterrupted access even during adverse weather conditions.
Optimized dish alignment enhances reception across all channels. Small adjustments can significantly improve signal clarity, reduce interference, and provide viewers with a smooth and enjoyable viewing experience.
Understanding satellite footprints allows users to maximize their setup. By positioning dishes according to coverage areas, viewers can access a wider range of channels with minimal signal degradation.
Combining accurate configuration, premium equipment, proper alignment, and knowledge of coverage areas ensures a stable and seamless TV experience, offering consistent access to global news, entertainment, sports, and educational programming.
Signal quality depends not only on correct settings but also on the durability and performance of hardware. Well-built dishes, robust cables, and tightly secured connectors contribute to consistent reception even when environmental conditions are less than ideal.
Proper dish orientation and precise tuning can make a significant difference in signal clarity. Small adjustments often lead to clearer images, uninterrupted audio, and the ability to enjoy every available channel without interference.
By combining careful configuration, high-quality equipment, and informed placement, audiences can enjoy TV that is both reliable and immersive. This ensures continuous access to a wide range of programs, from sports and news to entertainment and educational content, all delivered with high-quality performance.
