With satellites continuously launching new transponders and channels, keeping up-to-date with frequency information is crucial. Accurate data ensures that viewers can tune their equipment correctly and avoid interruptions in signal reception.
Satellite networks are dynamic and subject to frequent changes, including channel relocations and updates in transmission parameters. Awareness of these adjustments allows audiences to maintain seamless access to their favorite programming.
Proper receiver configuration is fundamental for achieving stable and clear signals. Parameters like frequency, symbol rate, polarization, and modulation must be entered with precision to prevent disruptions, weak reception, or distorted images.
Equipment quality is just as important as accurate settings. High-grade satellite dishes, robust connectors, and reliable cables ensure that signals remain strong and consistent, even in areas prone to harsh weather conditions or environmental interference.
Aligning the satellite dish correctly is a critical factor in reception performance. Slight modifications in angle or orientation can significantly improve signal strength, reduce interference, and guarantee uninterrupted access to all intended channels.
Understanding satellite coverage areas helps viewers optimize their installations. Knowledge of footprints allows users to receive the maximum number of channels available in their region and minimizes the need for frequent adjustments.
Combining precise receiver settings, high-quality equipment, and awareness of satellite coverage ensures a smooth, uninterrupted viewing experience. Audiences can enjoy a diverse range of global content with confidence, whether for entertainment, education, or news, without worrying about signal interruptions.
As the number of satellites and available channels continues to grow, keeping up-to-date with accurate frequency information is essential. Without precise data, viewers may experience signal loss, pixelation, or complete unavailability of their favorite channels, disrupting the overall viewing experience.
The landscape of satellite broadcasting is constantly evolving. Channel frequencies, transponder settings, and transmission parameters are frequently updated, and awareness of these changes allows audiences to maintain uninterrupted access to their preferred programming.
Proper receiver configuration is critical for optimal performance. Key parameters such as frequency, polarization, symbol rate, and modulation type must be set accurately to prevent weak signals or distorted images, ensuring a stable and enjoyable viewing experience.
High-quality equipment plays an equally important role in maintaining signal integrity. Reliable satellite dishes, durable cables, and secure connectors help preserve strong and consistent reception, even under adverse environmental conditions such as storms, heavy rain, or strong winds.
Aligning and positioning the satellite dish correctly can dramatically enhance signal strength. Minor adjustments in the dish’s angle or orientation often make a significant difference in reception quality, reducing interference and ensuring that all available channels are received clearly.
Understanding regional satellite coverage is vital for optimizing installations. Knowledge of satellite footprints allows viewers to maximize channel availability in their area while minimizing the likelihood of weak or lost signals, ensuring a consistent and reliable TV experience.
Regular monitoring and maintenance of the satellite system contribute to long-term performance stability. Periodic inspection of cables, connectors, and dish alignment helps prevent technical issues and ensures that signals remain clear and uninterrupted over time.
Advanced satellite receivers now support high-definition and ultra-high-definition content. Proper tuning and accurate configuration are required to enjoy these formats at their full quality, as even small misalignments or incorrect settings can negatively affect the viewing experience.
Environmental factors can impact reception, but robust equipment and careful installation minimize these effects. Well-positioned dishes, reinforced cables, and secure connectors allow viewers to maintain uninterrupted access to their channels despite weather or other external challenges.
By combining accurate receiver settings, high-quality equipment, and awareness of satellite coverage, viewers can enjoy a seamless and uninterrupted TV experience. This approach ensures access to a wide variety of global content, from entertainment and sports to news and educational programming, providing a complete and satisfying viewing experience.
With satellites continuously launching new transponders and channels, keeping up-to-date with frequency information is crucial. Accurate data ensures that viewers can tune their equipment correctly and avoid interruptions in signal reception.
Satellite networks are dynamic and subject to frequent changes, including channel relocations and updates in transmission parameters. Awareness of these adjustments allows audiences to maintain seamless access to their favorite programming.
Proper receiver configuration is fundamental for achieving stable and clear signals. Parameters like frequency, symbol rate, polarization, and modulation must be entered with precision to prevent disruptions, weak reception, or distorted images.
Equipment quality is just as important as accurate settings. High-grade satellite dishes, robust connectors, and reliable cables ensure that signals remain strong and consistent, even in areas prone to harsh weather conditions or environmental interference.
Aligning the satellite dish correctly is a critical factor in reception performance. Slight modifications in angle or orientation can significantly improve signal strength, reduce interference, and guarantee uninterrupted access to all intended channels.
Understanding satellite coverage areas helps viewers optimize their installations. Knowledge of footprints allows users to receive the maximum number of channels available in their region and minimizes the need for frequent adjustments.
Combining precise receiver settings, high-quality equipment, and awareness of satellite coverage ensures a smooth, uninterrupted viewing experience. Audiences can enjoy a diverse range of global content with confidence, whether for entertainment, education, or news, without worrying about signal interruptions.
The rapid expansion of satellite networks and the continuous launch of new channels make staying informed about accurate frequency information essential. Without precise tuning, viewers may experience interruptions, degraded signal quality, or the complete loss of channels they rely on daily.
Satellite systems are complex and constantly evolving. Channel frequencies, transponder settings, and transmission parameters are frequently updated, requiring viewers to adjust their equipment to maintain consistent access. Being aware of these changes ensures uninterrupted entertainment and reliable reception.
Accurate configuration of satellite receivers is crucial for achieving optimal performance. Key parameters, including frequency, polarization, symbol rate, and modulation type, must be entered carefully to avoid weak signals or distorted images, ensuring a clear and stable viewing experience.
The quality of equipment also significantly influences reception. High-quality satellite dishes, secure connectors, and durable cabling work together to maintain strong and consistent signals, even in areas affected by environmental challenges or signal interference.
Correct alignment and positioning of the satellite dish further enhance performance. Even small adjustments in angle or direction can improve signal strength, reduce interference, and guarantee that all desired channels are received with maximum clarity.
Understanding regional satellite coverage areas allows viewers to optimize their installations. Knowledge of footprints helps users receive the full range of available channels while minimizing disruptions or the need for repeated retuning.
With precise receiver settings, quality equipment, and awareness of satellite coverage, viewers can enjoy a seamless and uninterrupted TV experience. This combination ensures access to a rich variety of content worldwide, from entertainment and sports to news and educational programming, all delivered with clarity and reliability.
The rapidly changing landscape of satellite broadcasting demands constant attention to frequency information. Without accurate data, viewers risk losing access to channels or experiencing interrupted reception, highlighting the importance of precise tuning and regular updates.
Modern satellites are equipped with multiple transponders and frequently adjust their positions, requiring viewers to stay informed to maintain uninterrupted access. Awareness of these changes allows audiences to enjoy continuous, high-quality viewing without the frustration of signal drops or pixelation.
Setting up a satellite receiver correctly is a critical step in ensuring optimal performance. Accurate entry of parameters such as frequency, polarization, symbol rate, and modulation type is essential to avoid weak signals, distorted images, or temporary channel loss.
The quality of equipment plays an equally vital role. Durable satellite dishes, high-quality cables, and secure connectors work together to sustain strong, stable signals, even in challenging weather conditions or regions with complex satellite footprints.
Proper dish alignment and orientation are crucial to maximizing signal strength. Even minor adjustments can significantly enhance reception, reduce interference, and ensure that viewers receive every available channel with clear and stable transmission.
Understanding regional satellite coverage allows viewers to optimize their installations effectively. By knowing the exact footprint of each satellite, users can configure their dishes to capture the widest possible range of channels while minimizing interference from nearby satellites.
Combining precise receiver settings, robust equipment, and a comprehensive understanding of satellite coverage guarantees a seamless TV experience. Viewers can enjoy uninterrupted access to a rich variety of content, making satellite technology an indispensable tool for modern entertainment, information, and education.
2M Maroc, also known as the Second Channel or 2M Monde, is a leading Moroccan public TV channel, established in 1989 by the Société Nationale de Radiodiffusion et de Télévision (SNRT).
Based in Casablanca, 2M offers a vibrant mix of news, entertainment, sports, and cultural programs, appealing to Moroccans and the diaspora worldwide.
As a free-to-air channel broadcasting in Arabic, French, and Berber, it showcases Morocco’s diverse identity through popular dramas, talk shows, and live events.
This guide provides the latest frequencies for 2M Maroc on satellites as of June 2025, a step-by-step receiver setup process, expert tips for a strong signal, and highlights of its dynamic content, ensuring you can tune in seamlessly from Casablanca to Europe.
Why Choose 2M Maroc?
2M Maroc is Morocco’s most-watched channel, boasting a 35.4% audience share in 2018, far surpassing Al Aoula’s 9.2%.
Its engaging content includes dubbed international series, Moroccan dramas like L’Couple, and live sports coverage, such as Botola Pro matches.
The channel’s free-to-air status ensures accessibility, with HD broadcasts delivering crisp visuals. Available via live streaming on www.2m.ma and active on YouTube and Facebook, 2M connects Moroccans globally, offering a blend of modernity and tradition that resonates with families and youth alike.
2M Maroc Satellite Frequencies
To watch 2M Maroc, you need precise frequency, polarization, symbol rate, and FEC (Forward Error Correction) settings for your satellite receiver. The table below lists the latest frequencies for 2M Maroc on key satellites as of June 2025, sourced from reliable platforms like www.2m.ma, www.lyngsat.com, and www.altkia.com. As a free-to-air channel, no decryption is required. Always verify frequencies with these sources, as transponder settings may shift.
|
Satellite |
Frequency |
Polarization |
Symbol Rate |
FEC |
Coverage |
Details |
|---|---|---|---|---|---|---|
|
Nilesat 201/Eutelsat 7 West A (7.0° W) |
12015 MHz |
Vertical (V) |
27500 kS/s |
3/4 |
Middle East, North Africa |
SD/HD, DVB-S2, strong signal in Morocco, Algeria, Tunisia. Named 2M TV. |
|
Hot Bird 13E (13.0° E) |
10873 MHz |
Vertical (V) |
27500 kS/s |
3/4 |
Europe, parts of North Africa |
SD, DVB-S, ideal for diaspora in France, Italy. Named 2M Monde. |
|
Badr 4 (26.0° E) |
12683 MHz |
Vertical (V) |
27500 kS/s |
3/4 |
Middle East, North Africa |
SD, DVB-S, reliable in Morocco, Egypt, Jordan. Named 2M NAT. |
|
Eutelsat 21B (21.6° E) |
11567 MHz |
Horizontal (H) |
30000 kS/s |
2/3 |
Middle East, North Africa |
HD, DVB-S2, strong in Morocco, Libya. Named 2M NATIONAL. |
Key Information
-
Satellite Coverage: 2M Maroc is available on Nilesat, Hot Bird, Badr 4, and Eutelsat 21B. No confirmed frequencies exist for Yahsat (52.5° East) or Es’hailSat (25.5° East) as of June 2025.
-
Frequency Accuracy: Avoid outdated frequencies like 11476 MHz (Vertical) on Nilesat, which may no longer be active for 2M. The table above provides the most reliable settings.
-
Global Access: Signals may weaken outside MENA and Europe, such as in Asia or the Americas. Stream live on www.2m.ma or YouTube for worldwide viewing.
-
Free-to-Air Status: 2M Maroc is unencrypted, requiring no subscription, ensuring accessibility within satellite footprints.
Tips for a Strong Signal
To enjoy 2M Maroc’s programs with a robust and clear signal, follow these expert tips for satellite reception:
-
Dish Size: Use a 60-80 cm dish for Nilesat, Hot Bird, and Badr 4 in MENA and Europe (e.g., Rabat, Paris). For Eutelsat 21B, a 70-90 cm dish is ideal. In fringe areas (e.g., northern Europe for Nilesat), a 90-120 cm dish boosts signal strength.
-
Accurate Dish Alignment: Point your dish to Nilesat (7.0° W), Hot Bird (13.0° E), Badr 4 (26.0° E), or Eutelsat 21B (21.6° E) using a satellite finder or app like DishPointer or SatFinder. Ensure a clear line of sight free of obstructions.
-
LNB Selection: Setup a Universal Ku-band LNB with 9.75 GHz (low band) and 10.6 GHz (high band) frequencies. Ensure DVB-S2 compatibility for HD broadcasts on Nilesat and Eutelsat 21B.
-
Signal Quality: Target 70% or higher signal quality (98% is optimal) on your receiver’s signal meter to prevent pixelation. Fine-tune LNB skew for best performance.
-
Weather Protection: Ku-band signals can weaken during heavy rain. Secure your dish against wind and check LNB caps for water damage to maintain signal stability.
-
Coverage Verification: Confirm your location is within the satellite’s beam using coverage maps on www.dishpointer.com or www.satbeams.com.
Tuning 2M Maroc on Your Receiver
Adding 2M Maroc to your satellite receiver is quick and easy with these steps, designed for most receivers (e.g., Strong, Humax, Technisat), though menu names may vary slightly.
-
Enter the Setup Menu:
-
Press “Menu” or “Settings” on your remote.
-
Navigate to “Installation,” “Channel Search,” or “Antenna Setup.”
-
-
Select Manual Scan:
-
Choose “Manual Scan,” “Manual Installation,” or “Add Relay.”
-
Select “Add TP” or “Edit Relay” if prompted.
-
-
Choose Your Satellite:
-
Select Nilesat (7.0° W), Hot Bird 13E (13.0° E), Badr 4 (26.0° E), or Eutelsat 21B (21.6° E) from the satellite list.
-
If not listed, manually enter the orbital position.
-
-
Input Relay Settings:
-
Refer to the frequency table above and enter the settings for your chosen satellite (e.g., 12015 MHz, Vertical, 27500 kS/s, 3/4 for Nilesat).
-
Confirm all values are correct.
-
-
Start the Scan:
-
Press “Scan,” “Search,” or “OK” to initiate the scan.
-
Select “FTA Only” or “All Channels” to include free-to-air channels.
-
Wait 1-3 minutes for the scan to complete.
-
-
Save Channels:
-
Press “Save” or “OK” to store the scanned channels.
-
2M Maroc will appear as “2M TV,” “2M Monde,” “2M NAT,” or “2M NATIONAL” in your channel list, depending on the satellite.
-
-
Fine-Tune for Strong Signal:
-
If the signal is weak or the channel is missing, adjust the dish’s azimuth and elevation while monitoring the signal meter.
-
Check LNB skew and cables for 70-98% signal strength.
-
-
Test the Streaming:
-
Locate 2M Maroc in your channel list and select it to ensure clear playback.
-
If issues persist, recheck settings or consult a professional installer.
-
Receiver Tips:
-
For Strong receivers (e.g., SRT 4920), enable “LNB Power” in the “Relay” menu.
-
For Humax or Technisat, set LNB to “Universal” (9750/10600 MHz).
-
Default PINs (e.g., 0000, 1234) may be required; refer to your manual.
2M Maroc’s Diverse Programming
2M Maroc offers a rich lineup that blends entertainment, culture, and information, appealing to a broad audience. Key highlights include:
Top Programs
-
L’Couple: A beloved Moroccan comedy-drama series exploring family dynamics.
-
Moubasharatan Maakoum: A talk show addressing social and political issues with lively debates.
-
Sports Coverage: Live broadcasts of Botola Pro football matches and international tournaments.
-
MasterChef Maroc: A popular cooking competition showcasing Moroccan culinary talent.
-
Dubbed Series: Exclusive international dramas, such as Turkish series, dubbed in Moroccan Arabic.
Content divisions
-
News: Timely updates on Moroccan and global events in Arabic and French.
-
Sports: Live football matches and sports analysis, especially during major events.
-
Entertainment: Moroccan and international dramas, comedies, and music shows.
-
Cultural: Programs celebrating Moroccan heritage, arts, and Berber culture.
-
Social: Talk shows and documentaries addressing community issues and youth interests.
The performance of any satellite system depends on a combination of precise configuration and reliable equipment. Using high-quality dishes, secure connectors, and sturdy cables ensures that signals remain strong, minimizing interruptions even in challenging weather conditions.
Adjusting dish alignment and monitoring signal strength regularly can significantly improve the overall viewing experience. Minor tweaks often result in sharper visuals, uninterrupted audio, and consistent access to all desired channels without distortion or interference.
By combining technical knowledge, quality hardware, and careful tuning, viewers can enjoy an effortless and immersive satellite TV experience. This approach guarantees reliable access to global content, including news, entertainment, sports, and educational programming, enriching the viewing experience for every member of the household.
Accurate frequency information is essential to prevent signal loss or interference. Even small errors in setting transponders or modulation parameters can result in disrupted viewing, making updated data a necessity for uninterrupted access.
High-quality hardware plays a major role in consistent performance. Robust dishes, durable cabling, and secure connectors maintain strong signal strength, ensuring uninterrupted access even during adverse weather conditions.
Optimized dish alignment enhances reception across all channels. Small adjustments can significantly improve signal clarity, reduce interference, and provide viewers with a smooth and enjoyable viewing experience.
Understanding satellite footprints allows users to maximize their setup. By positioning dishes according to coverage areas, viewers can access a wider range of channels with minimal signal degradation.
Combining accurate configuration, premium equipment, proper alignment, and knowledge of coverage areas ensures a stable and seamless TV experience, offering consistent access to global news, entertainment, sports, and educational programming.
The performance of any satellite system depends on a combination of precise configuration and reliable equipment. Using high-quality dishes, secure connectors, and sturdy cables ensures that signals remain strong, minimizing interruptions even in challenging weather conditions.
Adjusting dish alignment and monitoring signal strength regularly can significantly improve the overall viewing experience. Minor tweaks often result in sharper visuals, uninterrupted audio, and consistent access to all desired channels without distortion or interference.
By combining technical knowledge, quality hardware, and careful tuning, viewers can enjoy an effortless and immersive satellite TV experience. This approach guarantees reliable access to global content, including news, entertainment, sports, and educational programming, enriching the viewing experience for every member of the household.
Satellite networks frequently update their transponder positions and channel frequencies. Staying informed about these changes allows viewers to quickly adjust their equipment and maintain seamless access to all channels.
High-quality equipment is crucial for signal stability. Durable dishes, reliable cables, and secure connectors reduce the risk of weak reception or disruptions caused by environmental factors like rain or strong winds.
Correct alignment of the satellite dish significantly improves signal strength. Even minor adjustments in angle or direction can enhance reception, minimize interference, and ensure that all desired channels are received with clarity.
Understanding satellite coverage areas helps optimize installations. Knowledge of footprints allows viewers to capture the maximum number of channels available in their region and reduces the need for repeated retuning or troubleshooting.
By combining precise receiver settings, quality equipment, and proper dish alignment, viewers can enjoy a smooth and uninterrupted TV experience, ensuring access to a wide variety of entertainment, news, sports, and educational content.
Satellite networks frequently update their transponder positions and channel frequencies. Staying informed about these changes allows viewers to quickly adjust their equipment and maintain seamless access to all channels.
High-quality equipment is crucial for signal stability. Durable dishes, reliable cables, and secure connectors reduce the risk of weak reception or disruptions caused by environmental factors like rain or strong winds.
Correct alignment of the satellite dish significantly improves signal strength. Even minor adjustments in angle or direction can enhance reception, minimize interference, and ensure that all desired channels are received with clarity.
Understanding satellite coverage areas helps optimize installations. Knowledge of footprints allows viewers to capture the maximum number of channels available in their region and reduces the need for repeated retuning or troubleshooting.
By combining precise receiver settings, quality equipment, and proper dish alignment, viewers can enjoy a smooth and uninterrupted TV experience, ensuring access to a wide variety of entertainment, news, sports, and educational content.
Signal clarity depends not only on correct receiver settings but also on the quality of the equipment used. High-grade satellite dishes, robust connectors, and reliable cables work together to maintain strong and stable reception, even under challenging environmental conditions.
Accurate configuration of frequency, polarization, symbol rate, and modulation is essential for optimal performance. Even minor errors can result in distorted images, weak signals, or temporary loss of channels, making attention to detail a key factor for uninterrupted viewing.
Proper dish alignment is crucial in maximizing signal strength. Adjusting the angle or direction of the dish, even slightly, can significantly reduce interference and improve reception across all available channels, ensuring a smooth and consistent experience.
Awareness of satellite coverage areas and footprints allows viewers to optimize their installations. By understanding which satellites provide the best signal in their region, audiences can access a wider range of channels with minimal effort or repeated adjustments.
Regular monitoring and maintenance of the satellite system further enhance long-term performance. Periodically checking equipment, verifying connections, and fine-tuning alignment prevent potential disruptions and contribute to a consistently high-quality viewing experience.
By combining accurate receiver settings, quality equipment, proper alignment, and knowledge of satellite coverage, viewers can enjoy a seamless and immersive TV experience. This approach ensures reliable access to entertainment, news, sports, and educational programming, creating a satisfying and uninterrupted viewing environment for the entire household.
Accurate frequency information is essential to prevent signal loss or interference. Even small errors in setting transponders or modulation parameters can result in disrupted viewing, making updated data a necessity for uninterrupted access.
High-quality hardware plays a major role in consistent performance. Robust dishes, durable cabling, and secure connectors maintain strong signal strength, ensuring uninterrupted access even during adverse weather conditions.
Optimized dish alignment enhances reception across all channels. Small adjustments can significantly improve signal clarity, reduce interference, and provide viewers with a smooth and enjoyable viewing experience.
Understanding satellite footprints allows users to maximize their setup. By positioning dishes according to coverage areas, viewers can access a wider range of channels with minimal signal degradation.
Combining accurate configuration, premium equipment, proper alignment, and knowledge of coverage areas ensures a stable and seamless TV experience, offering consistent access to global news, entertainment, sports, and educational programming.
Satellite networks frequently update their transponder positions and channel frequencies. Staying informed about these changes allows viewers to quickly adjust their equipment and maintain seamless access to all channels.
High-quality equipment is crucial for signal stability. Durable dishes, reliable cables, and secure connectors reduce the risk of weak reception or disruptions caused by environmental factors like rain or strong winds.
Correct alignment of the satellite dish significantly improves signal strength. Even minor adjustments in angle or direction can enhance reception, minimize interference, and ensure that all desired channels are received with clarity.
Understanding satellite coverage areas helps optimize installations. Knowledge of footprints allows viewers to capture the maximum number of channels available in their region and reduces the need for repeated retuning or troubleshooting.
By combining precise receiver settings, quality equipment, and proper dish alignment, viewers can enjoy a smooth and uninterrupted TV experience, ensuring access to a wide variety of entertainment, news, sports, and educational content.
Signal clarity is influenced by the combination of accurate receiver configuration and durable hardware. Properly installed dishes, reinforced cables, and secure connectors ensure stable performance even in areas affected by environmental challenges or high interference.
Fine-tuning the satellite dish and verifying all parameters can greatly enhance the viewing experience. Small adjustments often translate into sharper images, uninterrupted audio, and reliable access to all available channels.
With informed setup, quality equipment, and careful tuning, viewers can enjoy TV seamlessly and without frustration. This approach guarantees a dependable and high-quality viewing experience across a wide variety of channels, from entertainment and sports to news and educational content.
The performance of any satellite system depends on a combination of precise configuration and reliable equipment. Using high-quality dishes, secure connectors, and sturdy cables ensures that signals remain strong, minimizing interruptions even in challenging weather conditions.
Adjusting dish alignment and monitoring signal strength regularly can significantly improve the overall viewing experience. Minor tweaks often result in sharper visuals, uninterrupted audio, and consistent access to all desired channels without distortion or interference.
By combining technical knowledge, quality hardware, and careful tuning, viewers can enjoy an effortless and immersive satellite television experience. This approach guarantees reliable access to global content, including news, entertainment, sports, and educational programming, enriching the viewing experience for every member of the household.
